Foredom K.2230 Jewelers Kit, 230 Volt

Write a review
$739.00
K.2230-26
On backorder
+ −
Add to wish list

Product Description

All our Kits are Plugged for Australia and are 230-240v

PrePackaged Tool Kits contain just about everything you need to get to work- motor, speed control, handpiece and accessories. They take the guesswork out of product selection, offer the best value, and feature smart tool combinations for specific applications

Jewelers Kit K.2220-2 (230 Volt Model)

Components 

1. Series SR Motor:  Foredom's most popular and best motor for general use. The 1/6 hp, ball bearing, hang-up style M.SR runs in forward and reverse at speeds up to 18,000 RPM. It offers substantially more power than any of our older universal motors - 66% more than Series CC and 33% more than Series S and old SR motors. It comes equipped with a motor bale for hanging, and our standard 39" long key-tip inner shaft and outer sheath for connecting to any of Foredom’s 20+ interchangeable handpieces.  
2. C.FCH-2 Speed Control: Foredom's popular foot operated speed control. It has solid state electronics and comes in a heavy duty plastic housing with an extra wide design. 
3. H.30 Handpiece:  Foredom's most popular general purpose handpiece. It features a 3-jaw, geared chuck with a 0-5/32" capacity. Accessory changes are easy with this handpiece using the supplied HPCK-0 Chuck Key. The H.30 is a member of the Foredom system of interchangeable handpieces.
4. AK11 Accessory Kit (see complete product listing below): 
43 pc. assortment of professional jewelers/metal working accessories includes ScotchBrite EXL Wheels, CW Polishing Wheels, Platinum White Compound, Rubber Bonded Abrasive Wheels, Jewelers Burs, Ceramic Purple Sanding Bands, Felt and Cotton Buffs, Mounted Brushes, Mandrels, Engraving Burs, V Stone Wheel and more.
5. Flexible shaft grease

Accessory Kit AK11 consists of the following (we reserve the right to substitute comparable accessories when needed):
A-10081 1   Rotating Bur Holder 3/32" w/cup  
A-40061 1   Platinum White, 1" Tube  
A-4516   6   Radial Bristle Disc, 3/4" dia., Pink, Pumice (1,200 Grit), Pack of 6  
A-4912   3   Purple Ceramic Sanding Bands, 1/4" x 1/2", 60 grit  
A-4913   3   Purple Ceramic Sanding Bands, 1/4" x 1/2", 80 grit  
A-4914   3   Purple Ceramic Sanding Bands, 1/4" x 1/2", 120 grit  
A-4916   3   Purple Ceramic Sanding Bands, 1/4" x 1/2", 220 grit  
A-5517   1   Satin Finish ScotchBrite, Red, Fine, 7/8" dia. x 1/4" thick, Mounted with 3/32" Shank  
A-5524   1   Satin Finish ScotchBrite, Tan, Coarse, 7/8" dia. x 1/4" thick, Mounted with 3/32" Shank  
A-A1C     1   Rubber Bonded Abrasive, Brown, Wheel, 7/8" dia. x 1/8" thick with 1/16" Arbor Hole, Coarse, 40-60 Grit  
A-A1M    1   Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 120 grit (black)  
A-A1F     1   Rubber Bonded Abrasive Wheel, 7/8" x 1/8", 180 grit (green)  
A-CW556 1  CW Polishing Wheel, Orange, 7/8" x 1/8", 500 grit,  
A-CW557 1  CW Polishing Wheel, Gray, 7/8" x 1/8", 1000 grit,  
A-CW558 1  CW Polishing Wheel, White, 7/8" x 1/8", 1500 grit,  
A-D2        1  CUT-OFF DISC, 1-1/4" Fiberglass
A-FB4-I   1   FELT BUFF, Unmounted 5/8"  
A-M1       1 Mandrel,   3/32" shank & 1/16" arbor hole  
A-M13     1 Mandrel, LGE HD. 3/32 X 1/16  
A-MB1     1 Mounted Brush, Cup, Bristle, 3/32" shank 
A-MB2     1 Mounted Brush, Wheel, Bristle Stiff, 3/32" shank  
A-MB3     1 Mounted Brush, End, Bristle, 3/32" shank
A-MB4     1 Mounted Brush, End, Brass, 3/32" shank 
A-MB6     1 Mounted Brush, Wheel, Brass, 3/32" shank 
A-P3        1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank  
A-P7        1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank  
A-R2        1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank   
A-R7        1 High Speed Vanadium Steel Fluted Engraving Bur, 3/32" shank   
A-SD324  1 Rubber Sanding Drum Mandrel, 1/4" x 1/2",  3/32" shank  
A-V357    1 V Stone Point, Cylinder, 1/4" dia. x 1/2" long with 3/32" shank, 80 Grit

No posts found

Write a review