Hammer handpiece for stone setting and engraving. Comes in Brush Type Kits K.1080 and K.1090, and Brushless Dual Handpiece Kit K.1053.
Hammer handpiece for stone setting and engraving. Comes in Brush Type Kits K.1080 and K.1090, and Brushless Dual Handpiece Kit K.1053.
Hammer Handpiece H.MH-110
• Hammer action engages ONLY when light pressure is applied. This prevents unintended marring or marks and allows precise placement of tool tip.
• Force of impact adjusts from light to full by turning the knurled metal ring while the motor is off or running.
• Speed of the hammer action can be varied from 0– 2,500 strokes per minute using the control box dial.
• Adapters, anvil points, graver holder, screwdriver and spare motor brush pair included.
• Coiled cord connects the handpiece to the Control Unit.Specifications:
6-1/4″ Long, 9/16″ Diameter at grip, 1″ at motor, 13 oz/369g. DC30V/1.5A. CE marked.
Comes supplied in Kits K.1080, K.1090 and Dual Handpiece Kit K.1053. Also works with the same HP4-917 Control Unit that comes with Micromotor Kit K.1070.
• Hammer action engages ONLY when light pressure is applied. This prevents unintended marring or marks and allows precise placement of tool tip.
• Force of impact adjusts from light to full by turning the knurled metal ring while the motor is off or running.
• Speed of the hammer action can be varied from 0– 2,500 strokes per minute using the control box dial.
• Adapters, anvil points, graver holder, screwdriver and spare motor brush pair included.
• Coiled cord connects the handpiece to the Control Unit.Specifications:
6-1/4″ Long, 9/16″ Diameter at grip, 1″ at motor, 13 oz/369g. DC30V/1.5A. CE marked.
Comes supplied in Kits K.1080, K.1090 and Dual Handpiece Kit K.1053. Also works with the same HP4-917 Control Unit that comes with Micromotor Kit K.1070.
| Weight | 0.9 lbs |
|---|---|
| Dimensions | 9.5 × 2.25 × 2.25 in |
| SKU - Collet |
H.MH-130 – 2.35 mm (3/32"), H.MH-13018 – 1/8" collet |