MILL/LATHE ACCESSORIES

Sort by Position: Low to High
24 Per Page
Proxxon Precision steel vice PM 40
$AU95.00
Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate...
In stock
+ −
Add to wish list
Precision vise, large (suit PF/FF 230, PF/FF 400)
$AU146.00
Milled from steel, this high accuracy vise may be used on its side or on its back. Technical specifications 60mm jaw width 44mm maximum clamping capacity...
In stock
+ −
Add to wish list
Proxxon Step clamp set, small
$AU41.50
This set contains two stepped blocks and clamps, (11.5mm x 11mm x 4mm) Included components 2 x stepped blocks 2 x clamps 2 x T-slot nuts 2 x...
In stock
+ −
Add to wish list
Proxxon Step clamp set, large
$AU77.00
This set contains two stepped blocks and clamps, two T-slot nuts to fit the bed of the PF/FF 230 and PF/FF 400 milling machines, Stepcraft and two bolts....
In stock
+ −
Add to wish list
PROXXON Micro COMPOUND TABLE (KT-70)
$AU201.00
PROXXON Micro COMPOUND TABLE (KT-70)
In stock
+ −
Add to wish list
master
$AU0.00
In stock
+ −
Add to wish list
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (2, 3, 4, 5mm Dia.)
$AU69.00
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (2, 3, 4, 5mm Dia.)
In stock
+ −
Add to wish list
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (6, 7, 8, 10mm Dia.)
$AU82.00
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (6, 7, 8, 10mm Dia.)
In stock
+ −
Add to wish list
PROXXON 'Milling' FINE FEED - suits Miller FF-500/BL
$AU296.00
PROXXON 'Milling' FINE FEED - suits Miller FF-500/BL
In stock
+ −
Add to wish list
PROXXON 'Milling' FINE FEED - Suits Millers PF-230 & FF-230
$AU229.00
PROXXON 'Milling' FINE FEED - Suits Millers PF-230 & FF-230
In stock
+ −
Add to wish list
PROXXON 3-Jaw Gear Tooth CHUCK
$AU38.40
PROXXON 3-Jaw Gear Tooth CHUCK
In stock
+ −
Add to wish list
Proxxon Self-centering 3-jaw chuck Suit PD 250/E
$AU466.00
Proxxon Self-centering 3-jaw chuck Suit PD 250/E
In stock
+ −
Add to wish list
PROXXON SELF-CENTERING 3-JAW CHUCK SUIT PD-400
$AU565.00
PROXXON SELF-CENTERING 3-JAW CHUCK SUIT PD-400
In stock
+ −
Add to wish list
PROXXON 3-Jaw TAILSTOCK CHUCK
$AU29.95
PROXXON 3-Jaw TAILSTOCK CHUCK
In stock
+ −
Add to wish list
PROXXON 3-Jaw TAILSTOCK CHUCK - For (PD-250/E)
$AU38.40

PROXXON 3-Jaw TAILSTOCK CHUCK - For (PD-250/E)

In stock
+ −
Add to wish list
PROXXON 3-Piece THREAD CUTTING SET - For PD-250/E
$AU84.00
PROXXON 3-Piece THREAD CUTTING SET - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 3-Piece THREAD CUTTING SET - For PD-400
$AU87.00
PROXXON 3-Piece THREAD CUTTING SET - For PD-400
In stock
+ −
Add to wish list
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-250/E
$AU271.00
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-400
$AU271.00
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-400
In stock
+ −
Add to wish list
PROXXON 4-Jaw Independent CHUCK - For PD-250/E
$AU302.00
PROXXON 4-Jaw Independent CHUCK - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 4-Jaw Independent CHUCK - For PD-400
$AU373.00
PROXXON 4-Jaw Independent CHUCK - For PD-400
In stock
+ −
Add to wish list
PROXXON 4-Jaw Self-Centering CHUCK (PD400)
$AU661.00
PROXXON 4-Jaw Self-Centering CHUCK (PD400)
In stock
+ −
Add to wish list
Splash guard, chip tray, for lathe FD 150/E
$AU239.00
Splash guard, chip tray, for lathe FD 150/E
In stock
+ −
Add to wish list
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-250/E
$AU83.00
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-250/E
In stock
+ −
Add to wish list
 Prev
1 2 3 4
Next