MILL/LATHE ACCESSORIES

Sort by Position: Low to High
96 Per Page
Proxxon Precision steel vice PM 40
$AU95.00
Milled from steel for precision. Completely angular. Jaw width 46mm, clamping capacity 34mm. Total length 70mm. Especially suited for filigree and accurate...
In stock
+ −
Add to wish list
Precision vise, large (suit PF/FF 230, PF/FF 400)
$AU146.00
Milled from steel, this high accuracy vise may be used on its side or on its back. Technical specifications 60mm jaw width 44mm maximum clamping capacity...
In stock
+ −
Add to wish list
Proxxon Step clamp set, small
$AU41.50
This set contains two stepped blocks and clamps, (11.5mm x 11mm x 4mm) Included components 2 x stepped blocks 2 x clamps 2 x T-slot nuts 2 x...
In stock
+ −
Add to wish list
Proxxon Step clamp set, large
$AU77.00
This set contains two stepped blocks and clamps, two T-slot nuts to fit the bed of the PF/FF 230 and PF/FF 400 milling machines, Stepcraft and two bolts....
In stock
+ −
Add to wish list
PROXXON Micro COMPOUND TABLE (KT-70)
$AU201.00
PROXXON Micro COMPOUND TABLE (KT-70)
In stock
+ −
Add to wish list
master
$AU0.00
In stock
+ −
Add to wish list
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (2, 3, 4, 5mm Dia.)
$AU69.00
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (2, 3, 4, 5mm Dia.)
In stock
+ −
Add to wish list
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (6, 7, 8, 10mm Dia.)
$AU82.00
PROXXON 'HSS' Milling CUTTERS - 4-PCE SET (6, 7, 8, 10mm Dia.)
In stock
+ −
Add to wish list
PROXXON 'Milling' FINE FEED - suits Miller FF-500/BL
$AU296.00
PROXXON 'Milling' FINE FEED - suits Miller FF-500/BL
In stock
+ −
Add to wish list
PROXXON 'Milling' FINE FEED - Suits Millers PF-230 & FF-230
$AU229.00
PROXXON 'Milling' FINE FEED - Suits Millers PF-230 & FF-230
In stock
+ −
Add to wish list
PROXXON 3-Jaw Gear Tooth CHUCK
$AU38.40
PROXXON 3-Jaw Gear Tooth CHUCK
In stock
+ −
Add to wish list
Proxxon Self-centering 3-jaw chuck Suit PD 250/E
$AU466.00
Proxxon Self-centering 3-jaw chuck Suit PD 250/E
In stock
+ −
Add to wish list
PROXXON SELF-CENTERING 3-JAW CHUCK SUIT PD-400
$AU565.00
PROXXON SELF-CENTERING 3-JAW CHUCK SUIT PD-400
In stock
+ −
Add to wish list
PROXXON 3-Jaw TAILSTOCK CHUCK
$AU29.95
PROXXON 3-Jaw TAILSTOCK CHUCK
In stock
+ −
Add to wish list
PROXXON 3-Jaw TAILSTOCK CHUCK - For (PD-250/E)
$AU38.40

PROXXON 3-Jaw TAILSTOCK CHUCK - For (PD-250/E)

In stock
+ −
Add to wish list
PROXXON 3-Piece THREAD CUTTING SET - For PD-250/E
$AU84.00
PROXXON 3-Piece THREAD CUTTING SET - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 3-Piece THREAD CUTTING SET - For PD-400
$AU87.00
PROXXON 3-Piece THREAD CUTTING SET - For PD-400
In stock
+ −
Add to wish list
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-250/E
$AU271.00
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-400
$AU271.00
PROXXON 3-Piece Tungsten Tip LATHE TOOLS - For PD-400
In stock
+ −
Add to wish list
PROXXON 4-Jaw Independent CHUCK - For PD-250/E
$AU302.00
PROXXON 4-Jaw Independent CHUCK - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 4-Jaw Independent CHUCK - For PD-400
$AU373.00
PROXXON 4-Jaw Independent CHUCK - For PD-400
In stock
+ −
Add to wish list
PROXXON 4-Jaw Self-Centering CHUCK (PD400)
$AU661.00
PROXXON 4-Jaw Self-Centering CHUCK (PD400)
In stock
+ −
Add to wish list
Splash guard, chip tray, for lathe FD 150/E
$AU239.00
Splash guard, chip tray, for lathe FD 150/E
In stock
+ −
Add to wish list
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-250/E
$AU83.00
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-250/E
In stock
+ −
Add to wish list
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-400
$AU83.00
PROXXON 45° OFFSET CUTTER SET with Carbide insert for PD-400
In stock
+ −
Add to wish list
PROXXON 5-Piece 'HSS' Lathe TOOLS - For PD-250/E
$AU126.00
PROXXON 5-Piece 'HSS' Lathe TOOLS - For PD-250/E
In stock
+ −
Add to wish list
PROXXON 5-Piece 'HSS' Lathe TOOLS - For PD-400
$AU142.00
PROXXON 5-Piece 'HSS' Lathe TOOLS - For PD-400
In stock
+ −
Add to wish list
PROXXON 6-Piece 'HSS' BORING TOOLS
$AU113.00
PROXXON 6-Piece 'HSS' BORING TOOLS
In stock
+ −
Add to wish list
PROXXON 6-Piece 'HSS' Lathe TOOLS - For FD-150/E
$AU123.00
PROXXON 6-Piece 'HSS' Lathe TOOLS - For FD-150/E
In stock
+ −
Add to wish list
Splash guard and chip collecting tray for PROXXON milling machines
$AU445.00
Splash guard and chip collecting tray for PROXXON milling machines
In stock
+ −
Add to wish list
PROXXON 800mm Long SPLASH GUARD - For PD-400
$AU504.00
PROXXON 800mm Long SPLASH GUARD - For PD-400
In stock
+ −
Add to wish list
PROXXON Additional Q/CHG TOOL HOLDER - For PD-250/E
$AU41.90
PROXXON Additional Q/CHG TOOL HOLDER - For PD-250/E
In stock
+ −
Add to wish list
PROXXON Additional Q/CHG TOOL HOLDER - For PD-400
$AU52.00
PROXXON Additional Q/CHG TOOL HOLDER - For PD-400
In stock
+ −
Add to wish list
PROXXON Attachment for RADIUS CUTTING
$AU200.00
PROXXON Attachment for RADIUS CUTTING
In stock
+ −
Add to wish list
PROXXON Automatic universal axial feed AV/E for Miller FF-500/BL
$AU928.00
PROXXON Automatic universal axial feed AV/E for Miller FF-500/BL
In stock
+ −
Add to wish list
PROXXON Circ. Working DIVIDING HEAD suit MF70
$AU215.00
PROXXON Circ. Working DIVIDING HEAD suit MF70
In stock
+ −
Add to wish list
PROXXON Circ. Working DIVIDING HEAD (TA-250)
$AU435.00
PROXXON Circ. Working DIVIDING HEAD (TA-250)
In stock
+ −
Add to wish list
PROXXON CNC Lathe THREAD CUTTING KIT
$AU986.00
PROXXON CNC Lathe THREAD CUTTING KIT
In stock
+ −
Add to wish list
PROXXON COMPOUND TABLE (KT-150)
$AU432.00
PROXXON COMPOUND TABLE (KT-150)
In stock
+ −
Add to wish list
PROXXON COMPOUND TABLE (KT-230)
$AU734.00
PROXXON COMPOUND TABLE (KT-230)
In stock
+ −
Add to wish list
PROXXON Digital POSITION INDICATOR (DA-3.1)
$AU1,745.00
PROXXON Digital POSITION INDICATOR (DA-3.1)
In stock
+ −
Add to wish list
PROXXON EDGE FINDER SET
$AU57.00
PROXXON EDGE FINDER SET
In stock
+ −
Add to wish list
PROXXON Parting Tool 12 x 3 x 85mm HSS
$AU27.00
PROXXON Parting Tool 12 x 3 x 85mm HSS
In stock
+ −
Add to wish list
PROXXON Handheld Drill/Grinder ADAPTOR
$AU77.00
PROXXON Handheld Drill/Grinder ADAPTOR
In stock
+ −
Add to wish list
PROXXON HSS CENTRE DRILLS - 3-PCE SET
$AU21.20
PROXXON HSS CENTRE DRILLS - 3-PCE SET
In stock
+ −
Add to wish list
PROXXON Large STEP CLAMP SET
$AU77.00
PROXXON Large STEP CLAMP SET
In stock
+ −
Add to wish list
PROXXON LATHE 'ER 11' COLLET SET
$AU190.00
PROXXON LATHE 'ER 11' COLLET SET
In stock
+ −
Add to wish list
PROXXON LATHE 'ER 20' COLLET SET
$AU315.00
PROXXON LATHE 'ER 20' COLLET SET
In stock
+ −
Add to wish list
PROXXON Lathe CENTRE TURNING RIG - For PD-250/E
$AU191.00
PROXXON Lathe CENTRE TURNING RIG - For PD-250/E
In stock
+ −
Add to wish list
PROXXON Lathe CENTRE TURNING RIG - For PD-400
$AU182.00
PROXXON Lathe CENTRE TURNING RIG - For PD-400
In stock
+ −
Add to wish list
PROXXON Lathe CLAMPING FACEPLATE for PD400
$AU368.00
PROXXON Lathe CLAMPING FACEPLATE for PD400
In stock
+ −
Add to wish list
PROXXON Micro COMPOUND TABLE (KT-70/CNC-ready)
$AU595.00
MICRO compound table KT-70/CNC-ready. Made of solid aluminium with surface treatment and fitted with adjustable dovetail gibs and three T-slots of the...
In stock
+ −
Add to wish list
PROXXON Lathe FIXED STEADY - For PD-250/E
$AU133.00
Fixed steady for longer work pieces Especially for boring. Also required if the tailstock cannot be used to "counter". PRODUCT SPECIFICATION...
In stock
+ −
Add to wish list
PROXXON SPLASH GUARD suits Metal Lathe (PD-250/E) - 550mm Long
$AU356.00
Chip collecting tray with splash guard. Made from 1.5mm thick sheet metal, powder coated. Bevelled edges at the front and back allow slight cleaning....
In stock
+ −
Add to wish list
PROXXON MILL COLLET SET
$AU189.00
Five piece collet set. PRODUCT SPECIFICATION Includes 1 each of 2.4, 3, 3.2, 4 and 5mm, for milling cutters. Supplied in a wooden box with...
In stock
+ −
Add to wish list
PROXXON Quick Change TOOL POST SET - For PD-400
$AU181.00
Tool post - Including two holders. Provides quick tool changes with easy height adjustment. PRODUCT SPECIFICATION   For turning tools 10 x...
In stock
+ −
Add to wish list
PROXXON Lathe FIXED STEADY - For PD-400
$AU156.00
Fixed steady to support longer pieces for PD-400. Used on the PD-400 when turning long, slender work pieces. Fitted directly to the bed-ways and is...
In stock
+ −
Add to wish list
PROXXON Lathe TRAVELLING STEADY
$AU92.36
Travelling steady for PD-400 Fitted to the carriage of the lathe. Indispensable when turning long, slender work pieces. PRODUCT SPECIFICATION...
In stock
+ −
Add to wish list
PROXXON Mill & Drill HEAD (PF-230)
$AU1,573.00
Mill/drill head PF-230 for lathe PD-400 For mounting on the PD-400. The lathe's top slide is replaced with the table (supplied) of 110 x 70mm, with 3...
In stock
+ −
Add to wish list
PROXXON Lathe COLLET SET
$AU765.00
Collet attachment with collets for PD-400. For accurate use on round components.   Concentric accuracy better than 0.02mm, much better than a...
In stock
+ −
Add to wish list
PROXXON MILL 'ER 20' COLLET SET 5 pieces
$AU126.00
Multiple range standard type ER 20 collets. For the miller FF-500/BL. But also for older versions of the Mill/drill head PF-400 (from production no....
In stock
+ −
Add to wish list
PROXXON Universal DIVIDING TABLE (UT-400)
$AU809.00
Universal dividing table UT-400 For accurate machining of circular work pieces. The table may be fixed horizontally or vertically. Worm drive for...
In stock
+ −
Add to wish list
PROXXON Lathe DRILL/GRIND TOOL HOLDER
$AU30.40
Tool holder for rotary tools. For use on lathe machines. For precise clamping of rotary tool IBS/E or LBS/E in the tool post of the lathe. PRODUCT...
In stock
+ −
Add to wish list
Save 2%
Tool holder for rotary tools ( Dremel and Proxxon )
$AU59.40 $AU58.00
This holder allows mounting of rotary tools (we recommend the LB/E or IB/E from The Proxxon Micromot series) And the Dremel range to the PD 230/E or PD 400...
In stock
+ −
Add to wish list
PROXXON Lathe THREAD CUTTING SET
$AU155.00
Die holder for round dies. With holder Ø 10mm for mounting in the tailstock drill chuck of the lathe. The holder is held by hand while cutting the...
In stock
+ −
Add to wish list
PROXXON Precision V-BLOCKS 2 piece kit
$AU89.00
Precision V-blocks Used to clamp various work pieces. Four different depths of prism incisions V, all at 90°. The solid clamp and knurled knob...
In stock
+ −
Add to wish list
Save 8%
PROXXON Parallel SUPPORTS - 14-PCE SET
$AU229.00 $AU210.00
14-piece parallel supports set. Ground in pairs. For adjusting work on drilling machines, lathes and milling machines. Parallel accuracy 0.02mm. 2...
In stock
+ −
Add to wish list
PROXXON Q/Chg 'Parting' TOOL HOLDER
$AU96.00
Parting tool holder and tool. Used in the PD-400 quick-change system. Used to part stock and cut slots. PRODUCT SPECIFICATION The 12 x 3 x...
In stock
+ −
Add to wish list
PROXXON Tungsten REPLACEMENT TIPS - Pkt of 10
$AU126.00
Tungsten carbide inserts for the Offset Cutter sets Art No. 24560 & 24562 PRODUCT SPECIFICATION   Packet of 10
In stock
+ −
Add to wish list
PROXXON MILL/DRILL SYSTEM (BFW-40/E)
$AU534.00
Mill/drill system BFW-40/E, with controller for speeds of 900 - 6,000rpm. The triple ball bearing armature provides direct drive (no gearing)....
In stock
+ −
Add to wish list
PROXXON Quick Change TOOL POST SET - For PD-250/E
$AU195.00
PROXXON Additional Q/CHG TOOL HOLDER - For PD-250/E
In stock
+ −
Add to wish list
PROXXON Parting TOOL HOLDER and TOOL for PD-250/E
$AU118.00
PROXXON Additional Q/CHG TOOL HOLDER - For PD-250/E
In stock
+ −
Add to wish list
PROXXON Tungsten REPLACEMENT TIPS
$AU120.00
Tungsten carbide inserts for the Offset Cutter sets Art No. 24560 & 24562 PRODUCT SPECIFICATION  
In stock
+ −
Add to wish list
PROXXON Universal CNC DIVIDING TABLE (UT-400/CNC)
$AU1,383.00
PROXXON CNC Lathe THREAD CUTTING KIT
In stock
+ −
Add to wish list